placeholder
placeholder

Copy of DAKOTA CMX-DL+ UT With Coatings Mode

Placeholder DFX-7+ Flaw Detector & Thickness Gauge – NEED PICTURE
Phase II UT Gauge
0 out of 5
( There are no reviews yet. )

$3,550.00

SKU: DI-CMX-DL+ Categories: , , Tags: , , , , ,

Description

The CMX DL+ v2.0 gauges have all the features of the basic CMX models, plus a full featured A-Scan presentation with RF and Rectified viewing options. The CMX DL+ is equipped with 3 fully independent gates (start, stop, width, & Threshold). Equipped with a 110dB gain range for added flexibility with a variety of transducer types and applications. Selectable 50 volt pulser boost or cut (100 – 200 volts). The color version offers a rotating portrait or landscape option to increase the A-Scan viewing area. Our DakView java-based PC or MAC OSX software makes this kit truly the Cadillac of the CMX series.X series.

Specifications
PHYSICAL

 

  • Size: Width (2.5 in/63.5 mm)
    Height: (6.5 in/165 mm)
    Depth: (1.24 in/31.5 mm)
    Weight:13.5 ounces (with batteries).
  • Keyboard:Membrane switch pad with twelve tactile keys.
  • Operating Temperature:14 to 140F (-10C to 60C)
  • Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
  • Data Output: Bi-directional RS232 serial port. Windows® PC interface software.
  • Display (Two Options): 1/8 VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in (62 x 45.7 mm). EL backlit (on/off/auto). 25 Hz screen refresh rate.
    1/4 VGA AMOLED color display (320 x 240 pixels). Viewable area 1.7 x 2.27 in (43.2 x 57.6 mm). 120 Hz screen refresh rate.

ULTRASONIC SPECIFICATIONS

  • Measurement Modes:
    Coating Off: Pulse-Echo (P-E)
    Coating On: Pulse-Echo Coating (PECT)
    Temp Comp: Pulse-Echo Temperature Compensation (PETP)
    Thru-Paint: Echo-Echo (E-E)
    Thru-Paint Verify: Echo-Echo Verify (E-EV)
    Coating Only: Coating (CT)
  • Pulser: Dual square wave pulsers.
  • Receiver: Dual receivers – manual or AGC gain control with 110 dB range. Adjustable damping (50-1500 ohms).
  • Timing: Precision TCXO with single shot 100 MHz 8 bit ultra low power digitizer.

POWER SOURCE

  • Line Power: USB to PC or power outlet.
  • Three 1.5V alkaline or 1.2V NiCad AA cells.
  • Alkaline: grayscale 35 hrs, color 12 hrs.
  • Nicad: grayscale 10 hrs, color 5 hrs.
  • NI-MH: grayscale 35 hrs, color 12 hrs.
  • Power saving DIM (color), Auto power off if idle 5 min.
  • Battery status icon.
 MEASURING

 

  • Range: Pulse-Echo Mode (P-E): (Pit&Flaw Detection) measures from 0.025 48.0 inches (0.63 to 1219.2 millimeters).
  • Pulse-Echo Coating Mode (PECT): (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 48.0 inches (0.63 to 1219.2 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).
  • Pulse-Echo Temp Comp Mode (PETP): (Pit&Flaw Detection) Auto temperature compensation – measures from 0.025 48.0 inches (0.63 to 1219.2 millimeters).
  • Echo-Echo Mode (E-E): Thru Paint & Coatings) measures from 0.100 to 6.0 inches (2.54 to 152.4 millimeters). Range will vary +/- depending on the coating.
  • Echo-Echo Mode (E-EV): Thru Paint & Coatings) measures from 0.050 to 1.0 inches (1.27 to 25.4 millimeters). Will vary based on coating.
  • Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.0127 to 2.54 millimeters). Range will vary +/- depending on the coating.
  • Resolution: +/- .001 inches (0.01 mm), +/- .0001″ inches (0.001 mm)
  • Velocity Range: .0122 to .7300 in./ms (309.88 to 18542 meters/sec)
  • Calibration: Single and Two point calibration option for material & coating, or selection of basic material types.
  • Units: English & Metric

DISPLAY

  • Large Digits – Standard thickness view. Digit Height: 0.700 in (17.78 mm). Color 0.565 in (14.35 mm).
  • A-Scan – Rectified +/- (flaw view), RF (full waveform view).
  • Pulse Repetition Frequency – 250 Hz.
  • A-Scan Refresh Rate – B&W 25 Hz, color 60 Hz.
  • B-Scan – Time based cross section view. Display speed variable (10 to 200 readings per second). Adjustable display speed.
  • Scan Bar Thickness – Speed 33 Hz. Viewable in B-Scan and Large Digit views.
  • Repeatability Bar Graph – Bar graph indicates stability of reading.
  • Feature Status Bar – Indicates features currently active.
 MEMORY

 

  • Log Formats: Grid (alphanumeric)
    Sequential (auto identifier)
  • Capacity: 4 Gb internal SD card.
  • Screen Capture: Bitmap graphic capture for quick documentation (.tif).
  • OBSTRUCT to indicate inaccessible locations.

TRANSDUCER

  • Transducer Types: Dual/Single Element (1 to 20 MHz). Contact, matching layer, delay line, and pencil configurations.
  • LEMO 00 connectors.
  • Standard 4 foot cable.
  • Custom transducers & cable lengths available for special applications.

ADDITIONAL FEATURES

  • Auto probe zero, recognition and temperature compensation.
  • 64 custom setup configurations.
  • High speed scan up to 50 readings per second.
  • Audible alarm with hi/lo limits.
  • Built-in differential mode for QC inspections.

CONNECTIONS

  • Output: Direct USB-C 1.1 PC connectivity.
  • Transducer Connections: Two LEMO 00 connectors.

WARRANTY & CERTIFICATION

  • 2 year limited
  • Factory calibration traceable to NIST & MIL-STD-45662.

Additional information

Weight 2267.96185 kg
Title

Default Title

Reviews

There are no reviews yet.

Be the first to review “Copy of DAKOTA CMX-DL+ UT With Coatings Mode”