Wet Abrasion Scrub | Washability Tester

Description

ASTM D2486, ASTM D3450, ASTM D4213, ASTM D4213, ASTM D4828, ASTM F1319, ISO 11998 TQC scrub / washability test now custom configurable TQC Abrasion scrub/ washability Test to perform an abrasion and washability test on coated panels to define the resistance of paint, varnish, or related products to scratching, wearing and color loss due to wet or dry abrasion. Simulating everyday wear from cleaning actions or general use. The test is either used as a “pass / fail” test by testing to a specified number of strokes or defining the minimum number of strokes at which a coating fails by checking at regular intervals. Flexible adaptation to many testsThe new abrasion scrub/washability tester allows for the most flexible adaptation of the wide range of scrub, abrasion and washability tests that are in use.  First the base apparatus has to be selected, which is available in four models. A 110VAC and 230VAC model without pumps for dry tests, and a 110VAC and 220VAC model with pumps for dry and wet tests. Each base unit is completely flexible and allows for easy exchange of the tools used for testing. A variety of tests are possible, with just small modifications to make the device suitable for other tests. In order to choose the right parts a special Custom Configuration Matrix and a Standards Selection Table are available. These are available for download in the Extra Info section. With the introduction of the next generation washability tests, the costs for laboratories to comply to many standards significantly decreases. State-of-the-art-technologyThe TQC Automatic Washability Tester is driven by a micro-step-controlled electro motor which allows precise and steady speed and sinus wave form control. Operation is intuitive by means of a jog-dial switch and a multi-lingual operating menu on a large, illuminated display. Optional Camera Kit CAMERA TOOL KIT The TQC Sheen Camera Tool is created for the TQC Sheen Scrub, Abrasion and Washability tester (AB6000 & AB6010). As washability tests are time consuming, we created a camera tool and software to save operator time.  Accessories:    Item No: AB5060: Crockmeter / MEK test, DIN 55654, DIN 55654, includes TQC MEK /Crockmeter tool weight set (total weight 200g) felt and Viton O-ring set AB5025: Metal shims for ASTM D2486 Small (set of 4) AB5027: Metal shims for ASTM D2486 Large (set of 4) AB5113: Tube set for Washability Pumps, 4 pcs AB5115: Tube set for Washability Tester “Complete”, 8 pcs AB5031: Weight 1000g/35.3oz for washability tools AB5040: Weight 500g/17.6oz for washability tools  AB5066: Weight 300g/10.6oz for washability tools AB5074: Weight 54g/1.9oz for washability tools AB5065: Weight 45g/1.6oz for washability tools AB5032: Heavy weight support tool – Mandatory in: ASTM D 2486, ASTM D3450 Optional in: DIN 53778, ASTM D4213-92, ASTM D4828, ISO 11998, ASTM AB5055: Cloth Holder Tool AB5050: TQC Sponge tool large suitable for ASTM D4828 / D3450 AB5180: Glass plates ASTM D2486 for Washability test, set 2 pcs AB5019: Spare Sponge pads for tool AB5012, 5 pcs Dimensions sponge (LxWxH): 138x50x30mm Sponges can easily be cut AB5018: Spare Nylon brush for tool AB5011 AB5017: Spare Wild boar brush for tool AB5010 AB5015: Weight 100g/3.5oz for washability tools AB5014: Weight 60g/2.1oz for washability tools AB5013: Abrasive tool complete (135g/4.76oz) ISO 11998, includes Aluminum pad holder Inner dimensions holder 92x41mm Outer dimensions holder 94x43mm AB5012: Sponge tool complete (508g/17.92oz) ASTM D4213-92, ASTM D4828, includes Stainless steel holder Inner dimensions holder 92x41mm Outer AB5011: Nylon Brush tool complete (454g/16.01oz) ASTM D2486, includes Stainless steel brush holder Inner dimensions holder 92x41mm Outer dimensions AB5010: Wild Boar Brush tool complete (250g/8.82oz) DIN 53778, includes: Stainless steel holder Inner dimensions holder 92x41mm Outer dimensions holder 94 VF2316: TQC Washability opacity scrub charts, 100 pcs AB5016: Spare abrasive pads for tool AB5013, set 5 pcs

Additional information